Raymarine's QUANTUM 2 CHIRP pulse compression radar with doppler target identification technology provides you with extra safety on both long and short distances.
Due to the special processing of Doppler radar data, it is possible to display moving targets in color on the display.
Easily Identify Dangerous Targets
Raymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision.
Superior Collision Avoidance
Quantum 2 MARPA mode provides an effective means of dangerous target tracking. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard.
Key Features:
Doppler moving target display allows for superior situational awareness at-a-glance
Fully automatic ARPA target tracking, along with manual MARPA mode
Adjustable TrueTrails target history shows the motion history of moving contacts
CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation
24-mile range for early detection of traffic, navigation aids, landfall and weather
Immediate awareness – Quantum starts up and is ready to go in seconds
Superior interference rejection eliminates noise from other radars
Simplified installation with Wi-Fi or thin wire network connectivity
Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners
Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars
Safe emissions – mount Quantum anywhere onboard
Low power consumption for extended battery life under sail
How Doppler Radar Works?
Microwave energy waves are bounced off of a distant target, just like conventional radar.
Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted.
For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases.
For outbound targets, the frequency drops as the returning echoes spread out as its range increases.
Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets.
Doppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets.
Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away.
Inbound targets are colored red.
Outbound targets are colored green.
Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels.
Fully Automatic Target Acquisition and Tracking
The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics.
Raymarine Axiom Pro with Quantum
Quantum 2 also features Raymarine’s new True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely.
Raymarine Axiom Pro with QuantumRaymarine Axiom Pro with Quantum
Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD.
Technical Specifications
Dimensions: diameter x height 541.0 mm x 209.5 mm
Weight: 5.6 kg
Supply voltage: Either 12 V or 24 V DC nominal
Minimum: 10.8 V DC | Maximum: 31.2 V DC
Power consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2W
Waterproofing: IPX6
Operating temperature range: -10° C to +55°C
Storage temperature range: -25°C to +70°C
Additional storage conditions: Store upright; do not block vents on underside
Humidity: Up to 95% at 35°C
Maximum wind speed: 100 kts
Transmitter
Type: X-band solid-state transmitter with pulse compression technology
Transmit frequency: 9354 MHz to 9446 MHz
Peak power output: 20 W
Duplexer: Circulator
Pulse widths (3 dB): 4 ns to 14.7
Chirp bandwidth: Chirp lengths: 40 ns to
pulse repetition frequency: 2083 Hz
Chirp bandwidth: Up to 32 MHz
Standby mode Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link - ON
Antenna
Type: Patch array
Beamwidth (nominal): Horizontal: 4.9 ° | Vertical: 20 °
Polarization Horizontal
Rotation speed 24 rpm nominal
Doubler
Traget Tracking Tracking of 10 simultaneous MARPA and / or ARPA targets (with Doppler-assisted ARPA)
Target Filtering: True Motion mode identifies only those objects that are moving relative to the vessel
Compatibility
Raymarine AXIOM series (starting with Lighthouse version 3)
Raymarine AXIOM Pro Series (starting with Lighthouse version 3)
Raymarine eS series (starting with Lighthouse version 3)
Raymarine gS series (starting with Lighthouse version 3)
english
german
slovak
czech
